T076 (T-76 makes the Sherman sound Russian)'s track cleats are spaced 1 1/8" from side A of cleat 1 to side A of cleat 2, with each cleat being 7/8" wide.
As for the strength of the idler wheel springs, they are exactly as strong as they need to be. If you notice, each idler does not have 2 springs each, but rather 4. One small spring is inside the other larger spring. I found that the one large spring was not sufficient alone and no other spring avaiable at the local hardware store was stiff enough. So I used 2 that fit one inside the other, happened to combine to the proper tension. I dont happen to know what the specs are on those 2 springs are with out running down to Ace Hardware, but I will in a few days when I am off work if so requested. Aaron F SCAB T076 On Apr 20, 2:06 pm, ryan wells <[email protected]> wrote: > I was recently looking into buying a spektrum six transmitter package and saw > that channel mixing is possible. I was wondering if i could take two MAG type > speed controllers and connect them with mixed channels to oporate them as if > they were a Tri-Pact cirucut? Is this Reasonable? > > Also I was wanting to know what the spacing of the track pads on the T-76 > were? And how powerful are the springs that tension the idler wheel? > > Ryan P. -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
