Aaron,
No problem dude, it's okay...
Happens to me every once in a while, at least you had the presence of mind
to be aware of the possible omission and dealt with it accordingly.
Many would have not even noticed that their submission hadn't gone through.
Gates is an idiot anyway (I'm guessing it's his software to blame either
directly or indirectly-LOL). I call
him an A++ businessman and a B- software maker. He doesn't have to be a
"better" later because of the tactics he applies as the former!!
You should never have to apologize for diligence.
AND I really like your "had my shots" quip... may I borrow it from time to
time?
Soon to be R/C tanker--I hope (the hardest step often is that first one),
Dave D.
----- Original Message -----
From: "Cobra" <[email protected]>
To: "R/C Tank Combat" <[email protected]>
Sent: Thursday, April 21, 2011 12:27 AM
Subject: [TANKS] Re: Radio Mixing? / T-76 questions
How embarrassing.
On Apr 20, 9:25 pm, Cobra <[email protected]> wrote:
The T076 (T-76 makes the Sherman sound Russian) 's track cleats are 1
1/8" from side A I'd cleat 1 to side A of cleat 2, with each cleat
being 7/8" wide.
As for the spring strength on the idler wheels.............. I have no
idea. I could run down to the hardware store and check, but I don't
remember off the top of my head. If you look at the photos on T076's
profile, you will see a single spring on each shaft of an idler. After
test driving tho I found them to be too soft and no other springs at
the store were stiff enough and the correct length. :(
Alas I attempted a make shift solution. Finding a spring as long and
nearly as stiff as the original, but smaller in diameter, I slipped
the two together on the shafts, one over the other, and achieved the
desired effect.
Unfortunatly I do not have tension-ometer and can't give straight
numbers to ya. Sorry. Hope this helps.
Aaron F
SCAB
T076
(If this ends up being a double post, then sorry. First attempt didn't
show up. Besides, first one ended up saying I had photos a available
to view that I ended up not having. If this ends up being the only
post of mine that shows, then I am sure I will end up sounding
strange, crazy, or disturbed. But that's OK, I have had my shots and
haven't bitten anyone all day. However............ er...........
er........... This message has been terminated for your convenience.
Thank you for your patronage.)
On Apr 20, 2:06 pm, ryan wells <[email protected]> wrote:
> I was recently looking into buying a spektrum six transmitter package
> and saw that channel mixing is possible. I was wondering if i could take
> two MAG type speed controllers and connect them with mixed channels to
> oporate them as if they were a Tri-Pact cirucut? Is this Reasonable?
> Also I was wanting to know what the spacing of the track pads on the
> T-76 were? And how powerful are the springs that tension the idler
> wheel?
> Ryan P.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
