I have two of those motors like in the Navarone Gun. One is on the KV-2 and the other will be used in the future. Are you saying that the geared assembly and motor in the Navarone will work at 24V? I'm asking because I thought it was a 12V motor, but I could be wrong. Been a long time since I looked at mine and I won't be able to check it out until this weekend when I go home.
Derek On Thu, Jul 19, 2012 at 7:50 PM, jvragu47 <[email protected]> wrote: > No problem Aaron. Does your motor look like the one pictured on page 2 of > the Navarone gun FA-0003 ? If so, Kurt gave you the ultimate > pre-assembled rotate setup. That is what powers the Comet turret also. And > yes, the Scorpion mini is variable. See the video on page 3 of the Comet > T-39. Shows full traverse power at 18 volts and finer traverse. > > On Thursday, July 19, 2012 7:47:22 PM UTC-4, Aaron wrote: >> >> I have a geared motor on the T076 Sherman that I got from Kurt. he said >> it was from the original PzIV form of the Brummbar. If he is wrong then >> I apologize for his obvious attempts to decive me, and in turn, you. >> I assume the Scorpion Mini is a variable speed? Or is not? >> >> Aaron F >> >> >> >> >> On Thursday, July 19, 2012 4:35:09 PM UTC-7, jvragu47 wrote: >> >>> Aaron, >>> >>> It's rated up to 24 volts with a minor adjustment. What motor are you >>> talking about? I have the old motor from the Pz IV. Are you talking about >>> the motor I used in the Comet? The big globe motor? If so, I was running >>> that on 18 volts. Plenty of zip on the rotate when needed. >>> >>> On Thursday, July 19, 2012 4:16:20 PM UTC-4, Aaron wrote: >>>> >>>> John (jvragu47)- >>>> Will it work well for the turret motor from the old T012 PzIV while >>>> running on 24v? >>>> >>>> Aaron F >>>> >>>> >>>> On Thursday, July 19, 2012 12:01:18 PM UTC-7, jvragu47 wrote: >>>> >>>>> Aaron, >>>>> I've been using the scorpion mini from robot marketplace. >>>>> Works great. >>>>> >>>>> On Wednesday, July 18, 2012 10:54:55 PM UTC-4, Aaron wrote: >>>>>> >>>>>> What have you found to be a good turret ECS for the rotate/elevate? >>>>>> >>>>>> Aaron F >>>>>> >>>>> -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
