The duals are nice too because they are also much smaller packages for the most part. You can fit them in tighter spaces.
On Wed, May 22, 2013 at 3:19 PM, TyngTech <[email protected]> wrote: > Frank wrote: > > "We've also recently started > experimenting with the Talon SR Speed Controller ($60). That's a single > motor controller, so you'll need two of them and a mixing circuit ($40), > which puts the total price in the same ballpark as a dual motor > controller." > > The servo mixers are down in the $15 range from Robotmarketplace.com. > I'll be testing one of these tonight with two Talons. Even if a mixer is > required, the $135 spent on two Talons and a mixer is the lowest per amp > cost of any 60+ amp motor controller setup I've seen to date. Also, a very > nice advantage to a two controller setup are lower replacement costs if a > part breaks. A few years ago I blew a FET on one channel of my dual > channel RD-80 controller. Had to replace the entire unit for $300. With > two Talons, the same repair would have been $60. My next tank will be > running Talons with a spare in the toolbox. > > Steve > > -- > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > > --- > You received this message because you are subscribed to the Google Groups > "R/C Tank Combat" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
