I meant singles....no duals.

On Wed, May 22, 2013 at 3:26 PM, Derek Engelhaupt <[email protected]> wrote:

> The duals are nice too because they are also much smaller packages for the
> most part.  You can fit them in tighter spaces.
>
>
> On Wed, May 22, 2013 at 3:19 PM, TyngTech <[email protected]> wrote:
>
>> Frank wrote:
>>
>> "We've also recently started
>> experimenting with the Talon SR Speed Controller ($60).  That's a single
>> motor controller, so you'll need two of them and a mixing circuit ($40),
>> which puts the total price in the same ballpark as a dual motor
>> controller."
>>
>> The servo mixers are down in the $15 range from Robotmarketplace.com.
>>  I'll be testing one of these tonight with two Talons.  Even if a mixer is
>> required, the $135 spent on two Talons and a mixer is the lowest per amp
>> cost of any 60+ amp motor controller setup I've seen to date.  Also, a very
>> nice advantage to a two controller setup are lower replacement costs if a
>> part breaks.  A few years ago I blew a FET on one channel of my dual
>> channel RD-80 controller.  Had to replace the entire unit for $300.  With
>> two Talons, the same repair would have been $60.  My next tank will be
>> running Talons with a spare in the toolbox.
>>
>> Steve
>>
>>  --
>> --
>> You are currently subscribed to the "R/C Tank Combat" group.
>> To post a message, send email to [email protected]
>> To unsubscribe, send email to [email protected]
>> Visit the group at http://groups.google.com/group/rctankcombat
>>
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "R/C Tank Combat" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>>
>>
>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to