Hi Drake,
You can use this unit to actually start the generator via voltage
start parameters, I find it best to use this in conjunction
with the auto start from the Outback The Flex net works really well
for this. The Xantrex doesn't need it for most things as it has
multiple relays built into their GSM.
jay
peltz power
On Aug 29, 2008, at 9:44 PM, Drake Chamberlin wrote:
I haven't used one of these, but in the "old days" I used the Gen
Wiz, of which this is supposedly an updated version.
http://www.atkinsonelectronics.com/product_pdfs/GSCM.pdf
At 01:54 PM 8/28/2008, you wrote:
What are folks using to start generators using voltage parameters?
[EMAIL PROTECTED] www.SWNL.net
Solarwinds Northernlights
Serving Mid Coast Maine & Northern California
Me.# 207-832-7574 Cl.# 610-517-8401
******** MAINE'S CHARTER ********
NABCEP "Certified PV Installer"
******** MAINE'S CHARTER ********
Trace Xantrex "Certified" Dealer / Installer"
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
740-448-7328
303-328-5533
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
