Don't know how to do it gracefully but I would refuse to install it untill the pipe met spec. I don't think putting rerod in it and filling it with concrete would help. Have him re-do it or don't touch it with a 10' pole. Have you spoken to DPW, for suggestions? At least they can back your opinion. I call them for an opinion when I "step in it ".
Bob On Mon, Feb 2, 2009 at 11:40 AM, <[email protected]> wrote: > Wrenches i have a customer that wanted to install a dpw top of pole mount > for 18 sharp 180 watt panels. he installed his own pipe and even after > several reminders by me and a signed contract stating shcedule 80 8 inch > steel pipe he installed a 8 inch cast iron water main. > > My dilemma is this he claims to wave my liability in this install but he > has been a very high maintnence customer and seems to forget everything we > talk about or he signs. so would you go ahead with the install or is the > cast iron going to shear off and the rack fall over? > > financially i have met my obligations with the customer i can wave the > labor cost and tell him to find someone else at this point if need be i dont > want to be liable for spilling 18 panels on the ground and my insurance > wouldnt cover it as we went against dpw's recomendations > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
