Ryan, I would be very wary. If DP&W says it is engineered for Sched.40 steel then that is what it is most likely warrantied for. I don't do anything that would void a manufacturers warranty. After 21 years in this business it is one of the most important things I've learned. If DP&W will warranty it the way it is, then it is on them at that point. Good luck, Daryl DeJoy NABCEP Certified PV installer Penobscot Solar Design
> Wrenches i have a customer that wanted to install a dpw top of pole mount > for 18 sharp 180 watt panels. he installed his own pipe and even after > several reminders by me and a signed contract stating shcedule 80 8 inch > steel pipe he installed a 8 inch cast iron water main. > > My dilemma is this he claims to wave my liability in this install but he > has been a very high maintnence customer and seems to forget everything we > talk about or he signs. so would you go ahead with the install or is the > cast iron going to shear off and the rack fall over? > > financially i have met my obligations with the customer i can wave the > labor cost and tell him to find someone else at this point if need be i > dont want to be liable for spilling 18 panels on the ground and my > insurance wouldnt cover it as we went against dpw's > recomendations_______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
