Hi, Drake~ Consider this item: http://www.sunslates.net/
These are sized to match Eternit brand slates. I know very little else about this...but if you have a different size of slates... thinking... somebody else is out there with other sizes. OpenEnergy is a brand you might do well to search out, and friend Brian on this list with Eagle Roofing may have other suggestions. The "holesaw through the slate" idea sounds to me like it would ultimately rely on a caulked seal between the Oatey flashing and the slate upon which it rests. That sounds risky for what is probably a high end roof with a high end structure beneath. Jolliness, Mick Abraham, Proprietor www.abrahamsolar.com Voice: 970-731-4675 On Sun, Jul 18, 2010 at 2:19 PM, Drake Chamberlin <[email protected]> wrote: > Hi Wrenches, > > There was a strategy mentioned for slate roofs recently. Removing the slate > under the array area and replacing with decking and shingles would certainly > work. That might be the best solution. > > There are two potential problems however. > > It would cost a fair amount to replace that portion of the roof > My slate roof guy estimates that the existing rock is good for another > hundred years with a little maintenance. The slate is an incredible roofing > material, and it would be a shame to scrap it. > > One strategy that might work would be to take a diamond hole saw and cut > circles of slate out, over the rafters, to screw standoffs directly to the > rafters. Then an Oatey flashing could go over the standoff. > > Any feedback as to the viability of this method would be appreciated. > > Thanks, > > Drake Chamberlin > Athens Electric > OH License 44810 > CO License 3773 > NABCEP TM Certified PV Installer > Office - 740-448-7328 > Mobile - 740-856-9648 > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
