Hi Dan, The batteries will produce minute amounts of hydrogen even when they are idling, so we do need to have the proper ventilation to allow the gases to escape.
I would be more than happy to send you some new caps... The new caps will help limit the electrolyte egress. Please send me your mailing address and I'll send you some caps. Best Regards, Ronald Paredes Technical Product Manager - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: (562)236-3000 Ext. 3066 Fax: (562)236-3279 [email protected] www.trojanbattery.com Trojan Battery Company - Clean Energy for Life(tm) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dan Fink Sent: Friday, July 30, 2010 7:54 AM To: RE-wrenches Subject: [RE-wrenches] Trojan T-105 non-vented shipping caps? Esteemed Wrenches; Hopefully Ronald from Trojan can help me here, or maybe someone else has done this. In my recent remote Northern BC install, we have a pair of T-105s at a remote location, installed in a plastic cooler. They will need to be moved to the central Lodge install for winter maintenance charging, as their installed location gets *zero* sun for 3 months of the winter. The lodge staff will be moving the cooler via helicopter....*hopefully* on the back seat, but it may be part of a long-line sling load. They have had some pretty harrowing sling load work this year, including a broken skid on the helo and some trees that got a 'haircut.' I can almost guarantee that had the batteries been on that load, they would have lost some electrolyte from tipping. My question is -- are "shipping caps" with *no vent holes* available? Or could we use plastic baggies? I hate the idea of the lodge staff accidentally getting bits of plastic bag into the cells. DAN FINK Buckville Energy Consulting LLC http://www.buckville.com/ _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org This e-mail message and any attachments that accompany it may contain information that is confidential, privileged, or protected from disclosure. It is intended solely for the use of the individual(s) to whom it was intended to be addressed. If you have received this e-mail by mistake, or you are not the intended recipient, any reading, disclosure, copying or other use of this communication is strictly prohibited. If you have received this communication in error, please immediately advise the sender at their phone number listed above, or by electronic mail, and also permanently delete the original and all copies of this e-mail and any attachments from all locations. Thank you. _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
