I just figured out why I could not reset a GFI error on one of my micro-inverters. First, I noticed condensation in the led lens, then water literally dripped out of the AC side as soon as I disconnected it. This was mounted on the top backside of a panel, roughly two ft above a flat roof. ... fascinating
Kirk Herander Vermont Solar Engineering 802.863.1202 fax 802.863.7908 VT RE Incentive Program Partner NYSERDA Incentive-eligible Partner NABCEPTM Certified Installer
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
