Well, at least their warranty is second to none... for now... but if I had to bet on someone to stand behind their product, they would be high on the list just for the sheer dollars that must be flowing into their investment capital coffers.
I'd venture to say that there is not a single serious complaint out there about warranty coverage. We've had a few issues, but every single one has been resolved expeditiously by their surprisingly well trained and empowered staff. On that note, I've seen 3 GFI errors so far on Enphase micros, but never found out why. Jason Szumlanski Fafco Solar From: [email protected] [mailto:[email protected]] On Behalf Of Kirk Herander, VSE Sent: Thursday, June 16, 2011 9:50 PM To: 'RE-wrenches' Subject: [RE-wrenches] Enphase Nema 6 enclosure - not I just figured out why I could not reset a GFI error on one of my micro-inverters. First, I noticed condensation in the led lens, then water literally dripped out of the AC side as soon as I disconnected it. This was mounted on the top backside of a panel, roughly two ft above a flat roof. ..... fascinating Kirk Herander Vermont Solar Engineering 802.863.1202 fax 802.863.7908 VT RE Incentive Program Partner NYSERDA Incentive-eligible Partner NABCEPTM Certified Installer
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
