Jeremy, I understand that your application wants the wireless communication load to operate at 24VDC with a voltage tolerance of +-4V (15%). Since your battery bank will operate between voltages larger than +-15%, you will need typically 22-30V/24V DC/DC converter with max 15% voltage tolerance output, wired between your 24V configured battery bank DC output and your wireless communication load. Some DC/DC converter OEM suggestions that offer tighter voltage tolerances (0.5 to 1%): http://analyticsystems.com/products/dc_convert/
http://www.meanwelldirect.co.uk/products/200W-24V-Input-Single-Output-DC-DC-Converter/SD-200B-Series/default.htm John John F. DeBoever Global Technical Director - Renewable Energy Trojan Battery Company 12380 Clark Street Santa Fe Springs, CA 90670 Tel: +1-562-236-3000 Ext. 3139 Fax: +1-562-236-3239 [email protected]<mailto:[email protected]> www.trojanbattery.com<http://www.trojanbattery.com/> From: [email protected] [mailto:[email protected]] On Behalf Of All Solar, Inc. Sent: Thursday, November 03, 2011 6:27 PM To: 'RE-wrenches' Subject: [RE-wrenches] Voltage Regulator Hello, I have a client running wireless comm. equipment that he would like to run from a 24vdc battery bank. Even though it will operate either 12vdc or 24vdc, he would like to maintain 24vdc +/- 4v. Any ideas out there would be helpfull. Jeremy All Solar Inc. Jeremy and Amy Rodriguez 1463 M St Penrose, CO 81240 www.asolarelectric.com<http://www.asolarelectric.com> Phone 719-372-3808 Fax 719-372-3804 Email [email protected]<mailto:[email protected]> Email [email protected]<mailto:[email protected]> This e-mail message and any attachments that accompany it may contain information that is confidential, privileged, or protected from disclosure. It is intended solely for the use of the individual(s) to whom it was intended to be addressed. If you have received this e-mail by mistake, or you are not the intended recipient, any reading, disclosure, copying or other use of this communication is strictly prohibited. If you have received this communication in error, please immediately advise the sender at their phone number listed above, or by electronic mail, and also permanently delete the original and all copies of this e-mail and any attachments from all locations. Thank you.
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
