Makes me wonder how many dual breakers I have taken the handle tie off and used as singles in the past. It has been several, and none with no internal connections that I could find or notice, with the exception of longer rivets holding them together.
Granted it has been a while since I have done that. Later, Bob Ellison From: [email protected] [mailto:[email protected]] On Behalf Of John Berdner Sent: Wednesday, February 27, 2013 2:06 PM To: RE-wrenches Subject: Re: [RE-wrenches] DC circuit breakers in parallel Larry: The Code requires parallel breakers to be designed for this application (internally ganged). Just using a handle tie does not allow you to use the poles in parallel. Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 From: [email protected] [mailto:[email protected]] On Behalf Of Ryan Sent: Wednesday, February 27, 2013 8:45 AM To: [email protected] Subject: Re: [RE-wrenches] DC circuit breakers in parallel Larry Our 100 amp din rail is essentially 2 breakers in parallel. So in theory the 2 60 amp breakers "Could" work but. My concern would be that they may not be tripped at the same time where they are not internally ganged. I can't say "Go Ahead" but. Ryan -- Ryan Stankevitz Technical Support Manager MidNite Solar Inc. [email protected] 360-403-7207 XT 151 Skype ID ryan.midnite On 2/27/2013 11:21 AM, Larry Crutcher, Starlight Solar Power Systems wrote: We are installing the system today and I only have 60amp in stock. Customer lives in CA and is leaving today after the installation. Larry Crutcher Starlight Solar Power Systems On Feb 27, 2013, at 9:17 AM, Jonathan Hill wrote: Why not use one of Midnite's new 100 amp din breakers? Jonathan Hill Solar applications engineer Solar Electric Supply 530-559-3781 [email protected] On Feb 27, 2013, at 8:06 AM, "Larry Crutcher, Starlight Solar Power Systems"<[email protected]> wrote: Hello Wrenches, I am installing a Classic 150 controller in an RV with potential 95 amps output at 12 volts. The customer has a Midnite DIN box and wants me to use it for the controller output. I am out of 150VDC breakers but I have two 60 amp breakers. Is it safe and reliable to use the 2 breakers in parallel for this purpose? I can pin the two handles together. There will be other circuit protection at the battery. Thank you, Larry Crutcher Starlight Solar Power Systems _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org CONFIDENTIALITY NOTICE: This e-mail and its attachments are intended only for the use of the individual or entity who is the intended recipient and may contain information that is privileged, confidential and exempt from disclosure or any type of use under applicable law. If the reader of this e-mail is not the intended recipient, or the employee, agent, or representative responsible for delivering the e-mail to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this e-mail is strictly prohibited. If you have received this e-mail in error, please reply immediately to the sender. P Please think of the environment before printing this email _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2899 / Virus Database: 2641/6135 - Release Date: 02/26/13
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
