How about Soladeck? They have the din rail for breakers or fuseholders and are clearly for mounting at the roof slope. And they are UL approved.
Bill Dorsett Sunwrights From: [email protected] [mailto:[email protected]] On Behalf Of Mark Drummond Sent: Friday, November 08, 2013 12:59 AM To: RE-wrenches Subject: Re: [RE-wrenches] Square D Disconnects mounted on the slope of the roof. 15 degrees off of vertical is my understanding for standard RBs. So no, can't do that. Cheers good friend. On Nov 7, 2013 2:42 PM, "Kirpal Khalsa" <[email protected]> wrote: Hi Folks!!! Anyone aware of minimum slope requirements for Square D 321RB disconnects....Can they be mounted on rails parallel to the slope of the roof like Outback and Midnite solar combiner boxes(down to a 3/12 pitch) I can't seem to find any notes stating the limitations in manufacturer documentation...... They are NEMA 3 of course.... Thanks in advance for any direction you can provide.... Sunny Regards, Kirpal Khalsa NABCEP Certified PV Installation Professional Renewable Energy Systems www.oregonsolarworks.com 541-218-0201 m 541-592-3958 o _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
