It can look better when coming straight up like a chimney or stack.
At 02:45 PM 11/9/2013, you wrote:
Drake...we have made mounting brackets to make box vertical before
but our customers complained about aesthetics.....Hence the search
for a parallel to the roof slope mounting box quest......Bob O i
will look at the midnite dual pole 600VDC option....That sounds like
what we are looking for....
Thanks....
Sunny Regards,
Kirpal Khalsa
NABCEP Certified PV Installation Professional
Renewable Energy Systems
<http://www.oregonsolarworks.com>www.oregonsolarworks.com
541-218-0201 m
541-592-3958 o
On Sat, Nov 9, 2013 at 10:35 AM, Ray Walters
<<mailto:[email protected]>[email protected]> wrote:
We've made up mounting brackets with unistrut for this purpose as
well. We just bend their regular 45 deg angle brackets to match the
roof tilt. It's a bit of work though, so we are going to other
solutions like the Soladek, or just putting the combiner box in a
different location.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
<tel:303%20505-8760>303 505-8760
On 11/9/2013 11:01 AM, Drake wrote:
A NEMA 3R box can be mounted vertically on a sloping roof by
attaching brackets to the sides of the box and leveling the box.
The bracket or L-foot can allow the box to swivel to vertical.
At 09:33 AM 11/8/2013, you wrote:
Hi Kirpal,
All Square D safety switches are UL tested in the Vertical position ONLY,
so if someone is trying to install a switch in any other position other
than vertical, that will be between them and the inspector. Hope
this helps.
Eric
_____________________________________________________________________________________
Eric Bentsen | Schneider Electric | Solar
Business | UNITED STATES | Technical Support Representative
Phone: +(650) 351-8237 ext. 001# |
Email:
<mailto:[email protected]>[email protected]
| Site:
<http://www.schneider-electric.com/solar>www.schneider-electric.com/solar
| Address: 250 South Vasco Rd., Livermore, CA 94551
*** Please consider the environment before printing this e-mail
From: Kirpal Khalsa <mailto:[email protected]><[email protected]>
To: RE-wrenches
<mailto:[email protected]><[email protected]>
Date: 11/07/2013 01:42 PM
Subject: [RE-wrenches] Square D Disconnects mounted on the slope
of the roof.
Sent by:
<mailto:[email protected]>[email protected]
Hi Folks!!!
Anyone aware of minimum slope requirements for Square D 321RB
disconnects....Can they be mounted on rails parallel to the slope
of the roof like Outback and Midnite solar combiner boxes(down to
a 3/12 pitch)
I can't seem to find any notes stating the limitations in
manufacturer documentation...... They are NEMA 3 of course....
Thanks in advance for any direction you can provide....
Sunny Regards,
Kirpal Khalsa
NABCEP Certified PV Installation Professional
Renewable Energy Systems
<http://www.oregonsolarworks.com/>www.oregonsolarworks.com
<tel:541-218-0201>541-218-0201 m
<tel:541-592-3958>541-592-3958 o
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
_______________________________________________
List sponsored by Home Power magazine
List Address:
<mailto:[email protected]>[email protected]
Change email address & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
<http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
Check out participant bios:
<http://www.members.re-wrenches.htm>www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address:
<mailto:[email protected]>[email protected]
Change email address & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
<http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
Check out participant bios:
<http://www.members.re-wrenches.org/>www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address:
<mailto:[email protected]>[email protected]
Change email address & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
<http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
Check out participant bios:
<http://www.members.re-wrenches.org>www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address:
<mailto:[email protected]>[email protected]
Change email address & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
<http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
Check out participant bios:
<http://www.members.re-wrenches.org>www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
