Bob,
To clarify, I'd like to run RTS sensor wires from an MX or FX through a
three foot long, 2" flexible metal conduit that also has both of the pos and
neg 4/0 battery-to-inverter cables in it. I was wondering about the effect of
the RF, EMF or whatever else might have on the RTS wires for that 3 feet and
the signal imposed (or not)back to the MX or FX. I usually stick the RTS
itself on one of the battery cases in the middle of the pack.
Thanks,
Bill
----- Original Message -----
From: RE Ellison
To: 'RE-wrenches'
Sent: Monday, April 13, 2015 7:26 PM
Subject: Re: [RE-wrenches] RTS interference?
Hate to ask, but, is it on the negative terminal?
Bob
From: RE-wrenches [mailto:[email protected]] On
Behalf Of Jerry Shafer
Sent: Monday, April 13, 2015 8:18 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] RTS interference?
Never had a problem with DC .
Jerry
On Apr 12, 2015 6:16 AM, "frenergy" <[email protected]> wrote:
Hey folks,
Has anyone found a problem running a RTS cable in FMC conduit with the
battery-to-inverter cables?
Thanks,
Bill
Feather River Solar Electric
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
