Hi Khirpa, We use a high quality mini hex crimper with rotatable dies for #8-1/0 AWG. It is basically a miniature version of the Hex-Crimp battery lug crimper sold by Quick Cable. The one I have is older and no longer has the manufacturer label, but I believe it was marketed as a Cub Crimper. A quick web search shows that there is still a similar crimper sold under that name. At any rate, I have been very pleased with this crimper, and I'd recommend it.
Best, -Luke On Jun 4, 2015, at 12:11 PM, Kirpal Khalsa <[email protected]> wrote: > Greetings wrenches. ....we would like to vet a good quality crimper for > crimping copper ring terminals to our mid range wire sizes....Any of you have > a good quality crimping tool you can recommend. ...wire sizes I am looking to > crimp are #2-#8 AWG..... > Thanks in advance! > Kirpal Khalsa > Oregon Solarworks > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > Luke Christy NABCEP Certified PV Installation Professional™: Certification #031409-25 NABCEP Certified Solar Heating Installer™: Certification #ST032611-03 CoSEIA Certified PV Installer Solar Gain Services, LLC PO Box 531 Monte Vista, CO. 81144 [email protected] 719.588.3044 www.sgsrenewables.com _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
