Luke, Mick Jay.....Thank you for the feedback..I just ordered a set of the cub crimpers...I think it is going to be a useful addition to our tool chest. What prompted this is that we often solder our ring terminals on but it tends to stiffen the copper wire.....We use alot of the Midnite panel mount breakers and the 300VDC breakers still have the really chincy terminal posts which break off with just the slightest twisting of the wire....Over the years Outback Power also used those breakers and we have piles of those brand new crappy breakers which have a broken terminal post....I noted some of the single pole panel mount breakers have a sturdier terminal post and this problem is going away....I am hoping this can happen for all the panel mount breakers these manufacturers sell. Made me realize a high quality crimp without the stiffening of the wire will help reduce this problem. Those breakers are expensive! Thanks for the advice!!
Sunny Regards, Kirpal Khalsa NABCEP Certified PV Installation Professional Oregon Solarworks LLC www.oregonsolarworks.com 541-218-0201 m 541-299-0402 o On Thu, Jun 4, 2015 at 12:26 PM, Luke Christy <[email protected]> wrote: > Hi Khirpa, > We use a high quality mini hex crimper with rotatable dies for #8-1/0 AWG. > It is basically a miniature version of the Hex-Crimp battery lug crimper > sold by Quick Cable. The one I have is older and no longer has the > manufacturer label, but I believe it was marketed as a Cub Crimper. A quick > web search shows that there is still a similar crimper sold under that > name. At any rate, I have been very pleased with this crimper, and I'd > recommend it. > > Best, > -Luke > > On Jun 4, 2015, at 12:11 PM, Kirpal Khalsa <[email protected]> wrote: > > > Greetings wrenches. ....we would like to vet a good quality crimper for > crimping copper ring terminals to our mid range wire sizes....Any of you > have a good quality crimping tool you can recommend. ...wire sizes I am > looking to crimp are #2-#8 AWG..... > > Thanks in advance! > > Kirpal Khalsa > > Oregon Solarworks > > > > _______________________________________________ > > List sponsored by Redwood Alliance > > > > List Address: [email protected] > > > > Change listserver email address & settings: > > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > > > List rules & etiquette: > > www.re-wrenches.org/etiquette.htm > > > > Check out or update participant bios: > > www.members.re-wrenches.org > > > > Luke Christy > > NABCEP Certified PV Installation Professional™: Certification #031409-25 > NABCEP Certified Solar Heating Installer™: Certification #ST032611-03 > CoSEIA Certified PV Installer > > Solar Gain Services, LLC > PO Box 531 > Monte Vista, CO. 81144 > [email protected] > 719.588.3044 > www.sgsrenewables.com > > > > > > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
