Yup, id pre-drill and use an ez-out, or use a flaring tool as a small press and drive it out.
RoyR On Jan 20, 2016 3:54 PM, "Kristopher Schmid" <sol...@legacysolar.com> wrote: > Greetings, > > Do any of you battery gurus have a suggestion for a method of removing a > bolt remnant that is corroded into a flag terminal. Both sides snapped off > flush with the flag. I was thinking try to drill it out or maybe a small > gear pulling tool? I will never again use the non stainless hardware > supplied by the manufacturer... > > Picture attached for reference. > > Thanks! > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
