There's no need to hit the bolt, just press it out with a pulley puller set for two legs.
On Thu, Jan 21, 2016 at 9:40 AM, Tump <[email protected]> wrote: > I personally would try to soak the offending post in a solution of baking > soda or some other corrosion remover for a while and then gently tap the > bolt on both sides. Continuing to do this will eventually loosen the > bolt.This IS a thru bolt not something that is threaded. certainly one can > drill it out using the step approach 1/8 " then 3/16 then 1/4 till you > get to 5/16. Gently tapping or drilling you should find this removal > easier then you thought. Tump > > On Jan 20, 2016, at 5:34 PM, Ray Walters wrote: > > The EZ out is for unscrewing a threaded connection, I've spent a bunch of > time with those only to have the EZ out break off in there too. Then > you've got a real mess of hardened tool steel. > > I would first drill several small 1/8" holes in the lead around the > circumference of the bolt. Then, I think tapping or pressing it out is the > way. The wheel puller would probably work. You'll end up with an > enlarged hole that you can either use a bigger bolt, or washers to deal > with. > > I agree some of the hardware that comes with cheaper L 16s, is inferior. > I've had plenty of those square heads come off with minimal torque. > > R.Ray Walters > CTO, Solarray, Inc > Nabcep Certified PV Installer, > Licensed Master Electrician > Solar Design Engineer303 505-8760 > > On 1/20/2016 3:04 PM, Roy Rakobitsch wrote: > > Yup, id pre-drill and use an ez-out, or use a flaring tool as a small > press and drive it out. > > RoyR > On Jan 20, 2016 3:54 PM, "Kristopher Schmid" <[email protected]> > wrote: > >> Greetings, >> >> Do any of you battery gurus have a suggestion for a method of removing a >> bolt remnant that is corroded into a flag terminal. Both sides snapped off >> flush with the flag. I was thinking try to drill it out or maybe a small >> gear pulling tool? I will never again use the non stainless hardware >> supplied by the manufacturer... >> >> Picture attached for reference. >> >> Thanks! >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> >> > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & > settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette:www.re-wrenches.org/etiquette.htm > > Check out or update participant bios:www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > *[email protected]* *www.SWNL.net* > Solarwinds Northernlights > * Serving Mid Coast Maine & Northern California* > * 207-832-7574 <207-832-7574> Cl. 610-517-8401 > <610-517-8401> * > *Blair "TUMP" May* > > > * ******** MAINE'S CHARTER ******** * * > NABCEP "Certified PV Installer"* > > > * ******** MAINE'S CHARTER ******** ** > Trace Xantrex "Certified" Dealer / Installer"* > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > -- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
