Jay: Thanks for the reply. I meant label the shunts. Doesn't the FNDC need to differentiate between PV charge and inverter charge?
William > On May 3, 2016, at 7:18 AM, Jay <[email protected]> wrote: > > Hi William, > > Yes you need the shunt for PV the FNDC to read correctly > > I'm not sure exactly what you mean about labeling the cc? > The FNDC doesn't care what each shunt does. Cc, inverter DC loads etc, if > that's what you mean > > > Jay > Peltz power. > > > > >> On May 3, 2016, at 12:10 AM, William Miller <[email protected]> wrote: >> >> Friends: >> >> I am setting up an Optics RE system with a system that has 8 FX inverters >> and 3 charge controllers. I installed two Mate3s and a Flexnet-DC. I need >> two shunts for the Inverters because 4 are connected in one DC1000 and 4 in >> the other. I installed a third shunt for the PV. >> >> The inverter Mate3 and Flexnet connects into one 10 port hub and the PV >> Mate3 connects into another hub with the charge controllers. >> >> Do I really need the PV shunt? How is the Flexnet processing charge current >> if it does not know there are charge controllers? >> >> I can’t seem to find the screen where you label the charge controllers. I >> am used to setting these up with Radians. Am I missing something? >> >> Any help is appreciates. Because when I posed this question to Outback and >> got the audible equivalent to a blank stare: >> >> >> Thanks in advance, >> >> William Miller >> >> >> <image003.jpg> >> Lic 773985 >> millersolar.com >> 805-438-5600 >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
