Nope doesn't care. You could have 1 shunt or 3. You just get to monitor the 3 shunts. The m3 display uses comm from the cc
Jay Sent from my iPhone > On May 3, 2016, at 8:44 AM, William Miller <[email protected]> wrote: > > Jay: > > Thanks for the reply. I meant label the shunts. Doesn't the FNDC need to > differentiate between PV charge and inverter charge? > > William > >> On May 3, 2016, at 7:18 AM, Jay <[email protected]> wrote: >> >> Hi William, >> >> Yes you need the shunt for PV the FNDC to read correctly >> >> I'm not sure exactly what you mean about labeling the cc? >> The FNDC doesn't care what each shunt does. Cc, inverter DC loads etc, if >> that's what you mean >> >> >> Jay >> Peltz power. >> >> >> >> >>> On May 3, 2016, at 12:10 AM, William Miller <[email protected]> wrote: >>> >>> Friends: >>> >>> I am setting up an Optics RE system with a system that has 8 FX inverters >>> and 3 charge controllers. I installed two Mate3s and a Flexnet-DC. I need >>> two shunts for the Inverters because 4 are connected in one DC1000 and 4 in >>> the other. I installed a third shunt for the PV. >>> >>> The inverter Mate3 and Flexnet connects into one 10 port hub and the PV >>> Mate3 connects into another hub with the charge controllers. >>> >>> Do I really need the PV shunt? How is the Flexnet processing charge >>> current if it does not know there are charge controllers? >>> >>> I can’t seem to find the screen where you label the charge controllers. I >>> am used to setting these up with Radians. Am I missing something? >>> >>> Any help is appreciates. Because when I posed this question to Outback and >>> got the audible equivalent to a blank stare: >>> >>> >>> Thanks in advance, >>> >>> William Miller >>> >>> >>> <image003.jpg> >>> Lic 773985 >>> millersolar.com >>> 805-438-5600 >>> >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> List Address: [email protected] >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://www.mail-archive.com/[email protected]/maillist.html >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> www.members.re-wrenches.org >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
