Could you use real slow pulse width modulation to do what you want? Are you trying to limit energy, power or volume delivered? If you've got the Cu 200, you could put a timer on the float switch contacts that cycle it on and off.
On Fri, Jul 1, 2016 at 6:14 PM, Maverick Brown <[email protected]> wrote: > Jay, > > Will a Variac work in this situation? > > > Thank you, > > Maverick > > > > On Jun 30, 2016, at 7:43 PM, jay <[email protected]> wrote: > > > > Hi All, > > > > Any trick methods to keep a SQflex running on AC power at a given flow > rate that is less than full power? > > > > I’ve got a well that is just on 1 gpm, around 150’ lift. > > > > the sqflex 3-2 will do it, but at 3gpm with full watts, an amazing 265 > watts. > > > > > > thx > > > > jay > > > > peltz power > > _______________________________________________ > > List sponsored by Redwood Alliance > > > > List Address: [email protected] > > > > Change listserver email address & settings: > > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > > > List rules & etiquette: > > www.re-wrenches.org/etiquette.htm > > > > Check out or update participant bios: > > www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > -- Mac Lewis *"Yo solo sé que no sé nada." -Sócrates*
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
