Wrenches Bypass diods fail and may short Jerry On Jul 2, 2016 1:49 PM, "frenergy" <[email protected]> wrote:
> I just came upon a small off-grid system: 12 volt, 4, Kyo 120's (I,mppt= > 7.1A; Voc = 21.7 or so), Trace C40 with display, etc. The combiner has > fuses for each PV/landing. At noon, output of the array is 10.5 amps. > Clamping the 4 pvs I get 5.5 amps on 2 PVs and 0.0 on 2 others. I > disconnect leads from terminals in PV j-box of the 'dead' PVs and I get > Voc=18.5 (pretty hot day) and Isc= 6 amps. However when I reconnect these > same PVs to the combiner there is no change in combined amps. Fronts and > backs of PVs look good, no burns, browns, bubbles in backsheet, under the > glass looks fine, its all good. Inside the J-boxes look perfect/new. > Ideas? > Thx, > Bill > > Feather River Solar Electric > Bill Battagin, Owner > 4291 Nelson St. > Taylorsville, CA 95983 > 530.284.7849 > CA Lic 874049 > www.frenergy.net > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
