I don't know what they're listed for but I know that they are very effective.
Michael D Nelson MD Electric & Solar, Inc. 707-684-0064 mobile 707-884-1862 office www.mdelectricsolar.com Sent from my iPhone > On Aug 10, 2016, at 2:51 PM, Glenn Burt <[email protected]> wrote: > > But are they listed to be used with greater stranded conductors than class B > or C (7 or19)? > From: Carl Adams > Sent: 8/10/2016 17:37 > To: RE-wrenches > Subject: Re: [RE-wrenches] Pass through/transition box for Enphase > > I second Mike Nelson's approach, simple, easily inspectable, rugged. > > Carl Adams > SunRock Solar > NABCEP Certified PV Installer > > >> On Aug 10, 2016 12:20 PM, "Mike Nelson" <[email protected]> wrote: >> I have been using buchannon copper crimps with their plastic snap on "wire >> nuts" for years to splice rooftop wires (enphase or pv wire to string >> inverter) inside junction boxes or soladecks. Best connection you can have >> and I've never had one come loose or melt down. >> >> Michael D Nelson >> MD Electric & Solar, Inc. >> 707-684-0064 mobile >> 707-884-1862 office >> www.mdelectricsolar.com >> Sent from my iPhone >> >>> On Aug 9, 2016, at 11:03 PM, Ray Walters <[email protected]> wrote: >>> >>> I think the issue has always been locating the right parts, not the >>> installation. Everyone carries the Cobra X flex, but not the ferrules. We >>> usually crimp lugs on and use breakers with stud terminals, so the need for >>> ferrules is minimal. >>> I have always wondered about the terminal bussbars from Outback and >>> Midnite though. They're ILSCO and I can't find any mention about extra >>> flex, which usually means they are not rated for anything beyond Class B >>> stranding. >>> >>> R.Ray Walters >>> CTO, Solarray, Inc >>> Nabcep Certified PV Installer, >>> Licensed Master Electrician >>> Solar Design Engineer >>> 303 505-8760 >>>> On 8/8/2016 9:54 PM, Jay wrote: >>>> Thimbles are easy to install and make fine strand wire OK for use in >>>> standard connections. >>>> >>>> Jay >>>> Peltz power. >>>> >>>> On Aug 8, 2016, at 5:39 PM, Glenn Burt <[email protected]> wrote: >>>> >>>>> Be aware that depending upon the vintage of the Engage cable, up to >>>>> recently the conductors used in their cables are fine stranded and cannot >>>>> be used in the terminal blocks provided with the Soladeck. >>>>> This has been acknowledged by Enphase with a revision to > > [The entire original message is not included.] > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
