Jerry,
Metal roof? comp? tile?
Bill
On 3/2/2018 1:23 PM, Jerry Caldwell wrote:
Dear Wrenches,
I have a customer with a low slope roof supported by TJI beams. Does
anyone have experience permitting and installing on TJIs? I'm curious
if jurisdictions are requiring Structural Engineer stamps.
Since the top chord of the beams is only 1 3/8" thick should we be
using shorter lag bolts for these installations? It also seems that it
would be undesirable to penetrate into the web of the beam.
Any advice would be appreciated here.
Thank you,
Jerry Caldwell
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
--
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
