Wrenches We have had success with sunmodo mounts, they have 5 mounting holes, you may want to talk directly with them Jerry
On Mar 3, 2018 12:26 PM, "Mark Frye" <ma...@berkeleysolar.com> wrote: > If you can take multiple 1/4" lags, you can consider the Hollaender Speed > Rail square flange. I have used this to built steel pipe rack, then > attaching solar rail to the pipe with u-bolts. > > > On 3/3/2018 12:45 PM, Ray wrote: > >> >> I can see that the TJI manu doesn't want us blowing 3/8" lags through the >> top chord of their engineered system. On the other hand, it IS designed to >> have nails and at least deck screws put into it, as that's how the builder >> attaches the roof decking. It seems that William's measured approach is (as >> usual) good advice. I think that multiple 1/4" lags with predilled holes >> might be acceptable, but that would be up to the engineers and AHJ. My >> issue with the EZ feet is that you are entirely dependent on how well the >> roof decking was installed. Nails and construction staples don't have >> great pull out resistance, so I would hope that the builder uses some type >> of rated screws to attach the decking. >> >> Ray Walters >> >> Remote Solar >> >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.or > g/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org