The Radian has 2, 4k, 240 volt inverters, so its different but the way the
computer works it makes the same from the load side of thingsJerry
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: frenergy <[email protected]>
Date: 5/29/18 5:51 PM (GMT-10:00)
To: [email protected]
Subject: [RE-wrenches] Xfmr's job?
Hey folks,
Outback FP2 with Xfrmr shifts power to "other" leg if that
leg needs more than the one FX can provide, right? Say, you need 5.5 KW
on leg 1, the Xfrmr pulls some power from the leg 2 (inverter) to
support that 5.5KW load on leg 1.
My question (assuming above is accurate) is does the 8048 Radian do the
same?
Thanks,
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
