HI Dave and everyone, Its interesting because there is a great deal of difference between OEM’s.
Outback says 4kw at 120v for 8kw radian. ( tech support) Magnum says 27 amps at 120v, 16.7 amps at 240 for MS4024PAE ( from the manual) Schneider says 4200 watts at 120v on XW-6848 ( from the manual) Also I know that the Magnum allows you to charge with just 120v and I think the XW is the same, OB you have to have 240v. Cheers jay > On May 30, 2018, at 7:52 AM, Dave Angelini Offgrid Solar > <offgridso...@sti.net> wrote: > > The 8kw radian still has to have balance! You can't expect it to supply > 8kw @ 120vac. It can supply 8kw @ 240 vac. > > >> Does each of the 4 kW 240 volt inverters have a maximum on the 120-volt >> power it can supply? for example, can it supply 70% of the 4 kW on 120 >> -volts? >> This example would leave 5.6 kW of 120-volt? >> >> On Tue, May 29, 2018 at 11:09 PM, jerrysgarage01 >> <jerrysgarag...@gmail.com> >> wrote: >> >>> The Radian has 2, 4k, 240 volt inverters, so its different but the way >>> the >>> computer works it makes the same from the load side of things >>> Jerry >>> >>> >>> >>> Sent from my Verizon, Samsung Galaxy smartphone >>> >>> >>> -------- Original message -------- >>> From: frenergy <frene...@psln.com> >>> Date: 5/29/18 5:51 PM (GMT-10:00) >>> To: re-wrenches@lists.re-wrenches.org >>> Subject: [RE-wrenches] Xfmr's job? >>> >>> Hey folks, >>> >>> Outback FP2 with Xfrmr shifts power to "other" leg if that >>> leg needs more than the one FX can provide, right? Say, you need 5.5 KW >>> on leg 1, the Xfrmr pulls some power from the leg 2 (inverter) to >>> support that 5.5KW load on leg 1. >>> >>> My question (assuming above is accurate) is does the 8048 Radian do the >>> same? >>> >>> Thanks, >>> >>> Bill >>> >>> Feather River Solar Electric >>> Bill Battagin, Owner >>> 4291 Nelson St. >>> Taylorsville, CA 95983 >>> 530.284.7849 >>> CA Lic 874049 >>> www.frenergy.net >>> >>> >>> --- _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org