Allan, have you talked directly with Bogart? Howie On Tue, Aug 21, 2018 at 12:56 PM Sindelar Solar <al...@sindelarsolar.com> wrote:
> Wrenches, > I would like to broaden this topic a bit, please: we're currently > installing our first Blue Ion LFP set (48kWh). I work almost exclusively > with existing off grid systems, often older systems most of which have > TriMetric monitors, either the TM2020 or newer TM2030. Has anyone > successfully reprogrammed a TriMet to accurately register SOC and other > data with LFP batteries? If so can you provide some guidance as to program > settings? > Thank you, > Allan > > On 8/20/2018 6:15 PM, Lou Russo wrote: > > Jay, > The batteries are Blue Ion 2.0 from Blue Planet Energy, the 8kWh cabinet. > The listed Maximum Continuous Charge and Maximum Discharge Rate is 1C. > > Aloha, > Lou Russo > > On Sat, Aug 18, 2018 at 6:27 AM Jay <jay.pe...@gmail.com> wrote: > >> Hi Lou, >> Can you tell us which LFP batteries? >> And what rates of discharge/charge? >> Jay >> Peltz power. >> >> On Aug 17, 2018, at 12:09 PM, Lou Russo <l...@spreesolarsystems.com> >> wrote: >> >> Hello All, >> >> Does anybody have any insight in getting the SOC to report accurately on >> the Outback FNDC when using batteries that have a minimal voltage curve? I >> have several systems with LFP batteries that have both a eGauge >> (communicating directly with the battery BMU) and a FNDC and I get wildly >> different SOCs. In a typical 24 hour period (12am-12am) I get SOCs on the >> FNDC that vary 2% to 34% of what the battery BMUs are reporting. I am >> assuming that the BMUs are reporting accurately. I would think a 1%-5% >> difference would be acceptable. >> >> Any help or thoughts on this subject would be greatly appreciated. >> >> Aloha, >> Lou Russo >> >> -- > > *Allan Sindelar* > al...@sindelarsolar.com > NABCEP Certified PV Installation Professional > New Mexico EE98J Journeyman Electrician > Founder (Retired), Positive Energy, Inc. > *505 780-2738 cell* > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
