Jay,

I have not seen this, yet.
If you go into the Magnums remote and look at AC meter does the meter reflect what your are seeing on your volt meter?
(I am guessing that you see this on your volt meter)

If this is a "AC coupling feature" then the user should be able to enable this for AC coupling and disable if not.
The factory setting should be disabled.

If this is a real feature and the user can not enable/disable I think it was not thought out well.

Louis.
-------- Original Message --------
Subject: [RE-wrenches] Magnum inverter issue
From: Jay <[email protected]>
Date: Wed, December 12, 2018 6:14 pm
To: [email protected]

Hi all,

I’ve had the following issue with a new PAE 4024.

It’s ac voltage will rise and fall about 10+ volts ( 124-115) over about 10 seconds like clock work. Regardless of the load, or battery SOC/voltage.
I checked with a local shop, they also have the issue. They checked all their back stock and they all did the same thing. However they had an older one, say 6 months old that didn’t do it. Nor do any of my previous magnum installs do this.

Clients are not too thrilled with this as lights go up and down in brightness.

Magnum’s response was that this is normal for an off grid inverter and that somehow this “feature” has to do with it being able to AC couple better.

I’m writing to ask if others have seen this as well and more importantly if anyone has a fix?

Thanks,

Jay
Peltz Power
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to