Hi Louis Again, magnum admitted to the issue, gave no fix.
I checked with RE-Wrenches as someone might have figured a work around. Jay > On Dec 12, 2018, at 8:11 PM, <[email protected]> > <[email protected]> wrote: > > Jay, > > I have not seen this, yet. > If you go into the Magnums remote and look at AC meter does the meter reflect > what your are seeing on your volt meter? > (I am guessing that you see this on your volt meter) > > If this is a "AC coupling feature" then the user should be able to enable > this for AC coupling and disable if not. > The factory setting should be disabled. > > If this is a real feature and the user can not enable/disable I think it was > not thought out well. > > Louis. > -------- Original Message -------- > Subject: [RE-wrenches] Magnum inverter issue > From: Jay <[email protected]> > Date: Wed, December 12, 2018 6:14 pm > To: [email protected] > > Hi all, > > I’ve had the following issue with a new PAE 4024. > > It’s ac voltage will rise and fall about 10+ volts ( 124-115) over about 10 > seconds like clock work. Regardless of the load, or battery SOC/voltage. > I checked with a local shop, they also have the issue. They checked all their > back stock and they all did the same thing. However they had an older one, > say 6 months old that didn’t do it. Nor do any of my previous magnum installs > do this. > > Clients are not too thrilled with this as lights go up and down in > brightness. > > Magnum’s response was that this is normal for an off grid inverter and that > somehow this “feature” has to do with it being able to AC couple better. > > I’m writing to ask if others have seen this as well and more importantly if > anyone has a fix? > > Thanks, > > Jay > Peltz Power > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
