You might find the Arctic flex or similar product from cobra w/ adequate ampacity rating using your #8 awg/ 85 A @30c www.polarwire.com <https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwit17PWipzmAhXttlkKHZNQDFQQFjAAegQIARAC&url=http%3A%2F%2Fwww.polarwire.com%2Fpdfs%2F2-13.pdf&usg=AOvVaw1MhtmkEkqVzOlT-APGtF2J> > On Dec 3, 2019, at 10:15 PM, Jerry Shafer <[email protected]> wrote: > > Wrenches > It has always been a "no no" to modify any inverter due to warranty concerns > but with the -41 if there is an issue it's only the top half of the inverter > now to swap so that's a plus but l would get it in writing first anyway to be > safe > Jerry > > On Tue, Dec 3, 2019, 6:05 PM frenergy <[email protected] > <mailto:[email protected]>> wrote: > Wrenchers, > > This particular install requires 6 Gauge for the AC output from a > few SB7.7......-41 inverters (for voltage drop). Pretty tight for the 3/4" > knock-outs in that inverter. Any harm in using a step-drill to open it up to > a 1" KO? Any experiences with this? I'm trying to avoid a J-box with a > transition to 8 Gauge with 4-14 Polaris connectors. > > Bill > > Feather River Solar Electric > Bill Battagin, Owner > 4291 Nelson St. > Taylorsville, CA 95983 > 530.284.7849 > CA Lic 874049 > www.frenergy.net <http://www.frenergy.net/> > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > <mailto:[email protected]> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > <http://www.mail-archive.com/[email protected]/maillist.html> > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > www.members.re-wrenches.org <http://www.members.re-wrenches.org/> > > <FRS_working_logo, 50%.JPG>_______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
> [email protected] > <blocked::mailto:[email protected]%22%20%5Co%20%22blocked::mailto:[email protected]> > www.SWNL.net > <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/> > Solarwinds Northernlights > Serving Mid Coast Maine & Northern California > 207-832-7574 Cl. 610-517-8401 > > Blair "TUMP" May > ******** MAINE'S CHARTER ******** > NABCEP "Certified PV Installer" > > ******** MAINE'S CHARTER ******** > Trace Xantrex "Certified" Dealer / Installer" >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
