I have a client w/ 8 stack of older VFX3648s, Off Grid. Presently connected to a Mate 3 & older hub 10. The generator run time/shut down time is never the same, sometimes 10+ hours of running while the inverters in “silent” mode. Gen stays running despite full batteries, confirmed by battery voltage & using my refractometer. The only "gen trigger" is battery voltage. I have cleared the history repeatedly & updated the Mate3 FW. Is there any conflict replacing the Mate 3 with the Mate 3S in an older system? I will be also changing out the Hub as well. Thoughts/suggestions > [email protected] > <blocked::mailto:[email protected]%22%20%5Co%20%22blocked::mailto:[email protected]> > www.SWNL.net > <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/> > Solarwinds Northernlights > Serving Mid Coast Maine & Northern California > 207-832-7574 Cl. 610-517-8401 > > Blair "TUMP" May > ******** MAINE'S CHARTER ******** > NABCEP "Certified PV Installer" > > ******** MAINE'S CHARTER ******** > Trace Xantrex "Certified" Dealer / Installer" >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
