I'd suggest reaching out to Travis at MT Solar as he has made custom manual adjusters for my old installed DPW pole mounts. No bolts to remove and easy for anyone to adjust the angle without the need of a ladder.
Christopher On Thu, Oct 15, 2020 at 10:25 AM Jay <[email protected]> wrote: > Hi Jeremy, > > I’ve not run into that issue but you could put more bolts at different > locations for different tilts. > > A template would keep them the correct spacing. > > Wouldn’t slide but would be adjustable. > > I don’t know if you’ve tried heat but it’s pretty amazing at getting > things loosened up. > The other way is cold, using a spray can for computers for example. > Or using the combo. > > Damn it’s just a stupid rack, should be easy. > > Jay > > Peltz power. > > > > On Oct 15, 2020, at 7:52 AM, Jeremy Rodriguez <[email protected]> > wrote: > > Does anyone have any trick to adjusting the tilt angle of the TPM4 pole > mounts? These are the racks with the aluminum beam (strongback) with slots > for the bolts. > We have tried anti seize, and cutting the heads of the bolts square in > attempts to help with adjustment. > Help! > > > Jeremy Rodriguez > Solar Installation / Design Expert > All Solar, Inc. > 1463 M St > Penrose Colorado 81240 > > Sent by Jeremy's iPhone. Sorry for typos and shorthand. > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- Chris Schaefer’s <http:www.solarandwindfx.com> *Tel/Fax 585-229-2083 or Cell 585-748-1870 * *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com <http://www.solarandwindfx.com> ~ E-mail: [email protected] <[email protected]>* Thomas Jefferson, the author of our great Constitution, once said, "democracy" will cease to exist when you take away from those who are willing to work and give to those who would not."
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
