I’ve found that using brass nuts work well and don’t seize on the SS bolt. Just be sure to use a lock washer. It’s not like you need a lot of clamping force, the bolt is in pure shear so brass is fine.
Jeremy Coxon NABCEP Certified MWBE Sent from my iPhone > On Oct 15, 2020, at 9:52 AM, Jeremy Rodriguez <[email protected]> wrote: > > Does anyone have any trick to adjusting the tilt angle of the TPM4 pole > mounts? These are the racks with the aluminum beam (strongback) with slots > for the bolts. > We have tried anti seize, and cutting the heads of the bolts square in > attempts to help with adjustment. > Help! > > > Jeremy Rodriguez > Solar Installation / Design Expert > All Solar, Inc. > 1463 M St > Penrose Colorado 81240 > > Sent by Jeremy's iPhone. Sorry for typos and shorthand.
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
