We've used an adjustable link like this
Ray Walters
Remote Solar
303 505-8760
On 10/15/20 12:50 PM, Chris Schaefer wrote:
I'd suggest reaching out to Travis at MT Solar as he has made custom
manual adjusters for my old installed DPW pole mounts. No bolts to
remove and easy for anyone to adjust the angle without the need of a
ladder.
Christopher
On Thu, Oct 15, 2020 at 10:25 AM Jay <[email protected]
<mailto:[email protected]>> wrote:
Hi Jeremy,
I’ve not run into that issue but you could put more bolts at
different locations for different tilts.
A template would keep them the correct spacing.
Wouldn’t slide but would be adjustable.
I don’t know if you’ve tried heat but it’s pretty amazing at
getting things loosened up.
The other way is cold, using a spray can for computers for example.
Or using the combo.
Damn it’s just a stupid rack, should be easy.
Jay
Peltz power.
On Oct 15, 2020, at 7:52 AM, Jeremy Rodriguez
<[email protected] <mailto:[email protected]>> wrote:
Does anyone have any trick to adjusting the tilt angle of the
TPM4 pole mounts? These are the racks with the aluminum beam
(strongback) with slots for the bolts.
We have tried anti seize, and cutting the heads of the bolts
square in attempts to help with adjustment.
Help!
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and shorthand.
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
<mailto:[email protected]>
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work,
try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
<mailto:[email protected]>
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work,
try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
Chris Schaefer’s
<http:www.solarandwindfx.com>
/Tel/Fax 585-229-2083 or Cell 585-748-1870
//5115 South Hill Road ~ Canandaigua New York 14424
//www.solarandwindfx.com <http://www.solarandwindfx.com> ~ E-mail:
[email protected] <mailto:[email protected]>/
/
/
Thomas Jefferson, the author of our great Constitution, once said,
"democracy" will cease to exist when you take away from those who are
willing to work and give to those who would not."
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
