I think there is a jumper in the FM100 that will allow the Mate3s to communicate with it. I don't remember off hand where it is and am not at a computer with that info, but maybe this will prompt a look at the manual to see if they mention it.
Brad On Fri, Oct 16, 2020 at 11:11 PM William Miller <[email protected]> wrote: > Friends: > > > > I installed a Flexmax 100 today in a dual FX system circa 2003. The > system has an oval Mate and it is no surprise the old Mate does not > communicate with the FM100 as this was made clear from the literature. > > > > I plugged in a new Mate3S directly into the FM100 hoping to connect and > see data, but alas, the display was almost entirely blank. It only showed > the battery voltage which was 500 volts, which I guess is a promotion. > > > > I then tried plugging the FM100 into a Hub 10.3 and then into the Mate3S. > Still no display. > > > > I’d like to field-check the FM100 with a Mate3 or 3S but don’t know how. > It used to be you could plug an MX60 into a Mate and get some semblance of > normality displayed. Can I swap out the old hub with a 10.3 with the > inverters connected and get FM100 data? Any ideas out there? > > > > Thanks in advanced. > > > > William > > > > PS: The FM100 is charging so that is not an issue. > > > > Wm > > > > Miller Solar > > 17395 Oak Road, Atascadero, CA 93422 > > 805-438-5600 > > www.millersolar.com > > CA Lic. 773985 > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
