Is it ags start and is it starting on volts or %, or load?
> On Jan 8, 2021, at 1:10 PM, Dave Angelini Offgrid Solar > <[email protected]> wrote: > > You said both, it will go into absorb for an hour only and it will net go > into absorb. Which one please? > > Is there an AGS? > > > Dave Angelini Offgrid Solar > "we go where powerlines don't" > http://members.sti.net/offgridsolar/ > e-mail [email protected] > text 209 813 0060 > >> On Fri, 08 Jan 2021 13:33:56 -0500, [email protected] >> wrote: >> Hello Wrenches, >> >> An off grid, Radian / Mate 3 system we set up some years back has worked > >> flawlessly. The client is now reporting that his system will only go >> into absorption charge for 1 hour per calendar day. The setting was >> previously to absorb for 2 hours. >> >> He has tried shutting off the generator and then restarting. The >> inverter will connect, but not go into absorb. >> >> During this cloudy period, he is only able to get the batteries to about > >> 80 percent before he needs to leave the site for a week or so. >> >> I finally go through to Outback, and they think it is a Firmware >> problem. As it is a long drive out, it seems worth while to run it by >> the list. Does FW this seem like the issue? >> >> Thank you, >> >> Drake > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
