William,
How much of a difference did you see in readings after an equalize charge
before adding water vs. after adding water and doing a short bulk charge?
Howie
Howie Michaelson
Sun Catcher
NABCEP Certified Solar PV Installerâ„¢
Solar Electric & Heat Pumps Systems Sales & Service
802-272-0004

On Tue, Feb 23, 2021, 5:27 PM William Miller <[email protected]>
wrote:

> Wrenches:
>
>
>
> If you recall, I had asked the question: After equalizing batteries,
> should I check SG before or after watering?  I performed the test I had
> promised to do.  The answer is, add water first.
>
>
>
> Here is the report on my test:  Link
> <https://millersolar.com/MillerSolar/case_studies/26%20Specific_Graviity/Specific_Gravity.html>
>
>
>
> Conclusion: Here is the proper order of steps to check Specific Gravity:
>
> 1. Verify water level in cells is above the moss-guard. Add water only to
> bring water to top of moss-guard if needed.
>
> 2. Run Equalizing charge.
>
> 3. Add distilled water to all cells to bring electrolyte to recommended
> level.
>
> 4. Apply bulk charge voltage to batteries for 30 minutes to mix
> electrolyte.
>
> 5. Test and record Specific Gravity.
>
>
>
> It seems obvious now, but I had to test it out…
>
>
>
> William
>
>
>
>
>
> Miller Solar
>
> 17395 Oak Road, Atascadero, CA 93422
>
> 805-438-5600
>
> www.millersolar.com
>
> CA Lic. 773985
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: [email protected]
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/[email protected]/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to