Shooting is only for Targets and hunting season. You can't shoot during Tourist season. If they are selling you need to verify that grid support is off!. There are so many settings that interact. By default it was.
I will ask, these are old units right? Did they ever work right? Is the firmware the same on all and do they have different ID numbers for the network? You may try going back to defaults. There really is not enough info in your post to go further. XW+ are out of support for US split phase and replaced with XWP about a year back. How old are they? If it were me, I would make sure that 2 of the units work correctly first. Take all other xw's off xanbus/Sync and test. Good Luck ! Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail [email protected] text 209 813 0060 On Sat, 12 Jun 2021 10:32:24 -0800, greg egan wrote: > Wrenches, I'm getting ready to go outside the building and shoot > myself. AC Coupling is turned off. The XW+ inverters are selling to > each other. XW+'s are disconnected from the load and from generator > input. System is off grid. When I switch the ATS the inverters are > supposed to pick up the load. ~ 12 kW, maybe 18 worst case. They are > selling to each other and when I make the switch the lights flicker and > the inverters go off, then they try to go on, and go off, etc. > > Sync cables are hooked up. 4 XW+ and 1 SCP on one xanbus network. No > gateway hooked up at this time. PV will be on it's own Xbus network. > Not planning on using the Gateway if I can help it. > > Thanks for any light you can shed on this. Not sure why Schneider would > ever want their inverters to sell to each other especially with AC > Coupling OFF. Arrgh. > > Greg Egan > Remote Power Inc. > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
