It’s a good idea to make sure only one set as Master the others are slave. Start by adding one slave at a time. Turn off Search, Charger and Grid Support until you know they are playing happy.
I prefer using the XW Config and walking through the wizard, but you can use Multi Unit setup, which will put everything in standby. I have several 8-12 unit XW sites 3-4 Inverters, SCP, AGS and Combox/ Gateway, etc. It can be done. Maverick Brown Off-Grid Solar Commander since 2006 Maverick Solar Enterprises, Inc. • Solar Commander Remote Power • SunFlow Systems Cathodic Protection [email protected] 512-460-9825 > On Jun 12, 2021, at 1:32 PM, greg egan <[email protected]> wrote: > > Wrenches, I'm getting ready to go outside the building and shoot myself. AC > Coupling is turned off. The XW+ inverters are selling to each other. XW+'s > are disconnected from the load and from generator input. System is off grid. > When I switch the ATS the inverters are supposed to pick up the load. ~ 12 > kW, maybe 18 worst case. They are selling to each other and when I make the > switch the lights flicker and the inverters go off, then they try to go on, > and go off, etc. > > Sync cables are hooked up. 4 XW+ and 1 SCP on one xanbus network. No gateway > hooked up at this time. PV will be on it's own Xbus network. Not planning > on using the Gateway if I can help it. > > Thanks for any light you can shed on this. Not sure why Schneider would ever > want their inverters to sell to each other especially with AC Coupling OFF. > Arrgh. > > Greg Egan > Remote Power Inc. > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
