Hi William Groan, I don't see that precise model in the series 100 installation manual <https://snapnrack.com/wp-content/uploads/2019/05/S100-UL-Install-Manual_v2.0_web.pdf> on pg 74 which is the bonding evaluation list of modules I hope for your sake Snapnrack will send an email the AHJ will accept that includes that module. I wish there was a reasonable workaround for AHJs here, like onsite resistance measurements.
Good luck, Rebekah Tel: 336.266.8800 On Tue, Jul 20, 2021 at 2:36 PM Sam Haraldson <[email protected]> wrote: > The SnapNrack UL 2703 document highlights it's UL listing when used with > Type 1 and Type 2 modules. > > > https://snapnrack.com/wp-content/uploads/2019/05/SnapNrack_Fire_Classification_Tech_Bulletin_v.2-1.pdf > > *SnapNrack Series 100, Ultra Rail and RL systems have been Certified for a > Class A fire rating with Type 1 and Type 2 modules, in accordance with the > standards set forth in UL1703/2703 and IBC 2012.* > > > The Mission Spec sheet references that it is UL listed under 1703. > > > https://s3.amazonaws.com/ecodirect_docs/Mission-Solar/Mission-Solar-MSE320SR8T-datasheet.pdf > > > For further reference this 1703 document talks a little about the > different module "types" that are tested. > > https://www.intertek.com/building/standards/ul-1703/ > > *The “Type” of module dictates the number of fire tests that will be > required during the test process, there are 3 common types (15 total) that > are determined by their superstrate, encapsulant, substrate materials, and > size of module.* > > > > > > > Sam Haraldson <[email protected]> > Installation & Service Manager > <http://www.onsiteenergyinc.com/> > > | o. (406) 551-6135 > <https://www.facebook.com/onsiteenergysolar/> > <https://www.instagram.com/onsiteenergyinc/> > <https://twitter.com/onsiteenergyinc> > <https://www.linkedin.com/company/onsite-energy-inc/> > > <https://onsiteenergyinc.com/bcorp> > > > On Tue, Jul 20, 2021 at 3:25 PM William Miller <[email protected]> > wrote: > >> Friends: >> >> >> >> I received the following correction noticed from a hired plan-checker: >> >> >> >> *Please provide the technical listing for the support rail system >> documenting that the supports have been tested with the PERC 60 panels. The >> UL 2703 listing requires the two to be tested/listed together for the rack >> to functionally ground the solar panels. [CEC 690.43(A)] Alternately, bond >> the metal parts of PV equipment to grounded metal supports per CEC >> 690.43(B).* >> >> >> >> Is it true that UL2703 requires testing with each and every type of >> module? I am using 100 Series rail from my stock with Mission MSE325SR8K >> panels. Does anyone have any documentation on file that would satisfy this >> request? >> >> >> >> I have sent an inquiry to Snap-n-rack about this but they often take a >> week or more to respond. >> >> >> >> Thanks in advance. >> >> >> >> William Miller >> >> >> >> Miller Solar >> >> 17395 Oak Road, Atascadero, CA 93422 >> >> 805-438-5600 >> >> www.millersolar.com >> >> CA Lic. 773985 >> >> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
