Any way you can just use the relay in the Flexnet or maybe there isn’t one installed on that system?
Nick > On Sep 14, 2021, at 11:15 AM, Michael Morningstar <[email protected]> > wrote: > > Actually I’m using the 12V relay to activate a battery vent fan. For > generator starting, I’m using the dry contact relay for two-wire start. I > have the circuit protected by a 2amp fast acting fuse. Fuse is good. > > >> On Sep 14, 2021, at 11:10 AM, Tuss, Lones <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi Michael >> It sound like you are using the 12 volt aux out on the radian to activate a >> separate relay. >> If so disconnect the relay then check and see if the 12 aux attempts to go >> high (12v dc). >> If it does it may be a relay issue. >> The Radian does have an on board relay you could use that instead of a >> discrete relay. >> In AGS on the Mate3(s) just select Relay. >> I hope this helps sir. >> Take Care >> >> >> >> From: RE-wrenches <[email protected] >> <mailto:[email protected]>> On Behalf Of Michael >> Morningstar >> Sent: Tuesday, September 14, 2021 10:55 AM >> To: RE-wrenches <[email protected] >> <mailto:[email protected]>> >> Subject: [RE-wrenches] Radian Generator Relay >> >> CAUTION: This email originated from outside of the Company. Do not click >> links or open attachments unless you recognize the sender and know the >> content is safe. >> >> >> Wrenches, >> >> I’ve got a Radian 8048/Mate 3S that no longer is activating the relay >> responsible for generator starting. I’ve power cycled everything and updated >> firmware. When I attempt to start the generator via the Mate 3S, the relay >> does not close. >> >> Any suggestions before I look into replacing the relay/board? >> >> Which board do I order and what is the best source? >> >> Many thanks, >> Michael >> >> >> >> >> >> Michael Morningstar >> >> >> Morningstar Electric >> PO Box 1494 >> Mount Shasta, California 96067 >> 530-921-0560 >> CSLB 949635 >> >> <image001.gif> >> >> >> >> This email and any attachments may contain confidential information that is >> intended only for the recipient(s). If you have received this email in >> error, please notify the sender and delete it from your system. Any views or >> opinions presented in this email are solely those of the author and do not >> necessarily represent those of the company or its affiliates. This email >> does not constitute an agreement to conduct transactions by electronic means >> and does not create any legally binding contract or enforceable obligation >> in the absence of a fully signed written contract. The recipient should >> check this email and any attachments for viruses. The company accepts no >> liability for any loss or damage caused by software viruses. If you are the >> intended recipient and you do not wish to receive similar email(s) from us >> in the future then please notify the sender. Please consider the environment >> before printing. _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> <http://re-wrenches.org/> >> >> List Address: [email protected] >> <mailto:[email protected]> >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> <https://www.mail-archive.com/[email protected]/> >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> <http://www.re-wrenches.org/etiquette.htm> >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/> > > > > Michael Morningstar > > Morningstar Electric > PO Box 1494 > Mount Shasta, California 96067 > 530-921-0560 > CSLB 949635 > > <SmallGif.gif> > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
