Hi Michael This is where a direct conversation is good I tried to call but could not connect. I thought you were using the AGS program on the Mate3S. If you are in the set up in the AGS you can point it at the Radian relay Or the Radian 12 volt aux If you want you can also point it to the port containing the FNDC Of course you will have to wire it to the proper source
When your customer want to start the gen Press the Gen button on the Mate3S select ON The FNDC rely will close and the gen should start Select Off The relay will open Gen should stop Select Auto And the preset run conditions in the AGS will be valid. I hope this helps. Take Care From: RE-wrenches <[email protected]> On Behalf Of Michael Morningstar Sent: Tuesday, September 14, 2021 2:01 PM To: RE-wrenches <[email protected]> Subject: Re: [RE-wrenches] Radian Generator Relay CAUTION: This email originated from outside of the Company. Do not click links or open attachments unless you recognize the sender and know the content is safe. I did not check whether or not the 12v relay was functional. I think I see where you are going. If the 12V relay isn’t working also, then the issue is elsewhere? Is that correct? I did look into using the FNDC relay, however it appears that it’s control is through the FNDC menu. Things are so simple when all my client has to do to control the generator is push the GEN button and choose a mode. Searching for the FNDC menu adds a layer of complexity. However, What I’m seeing is that the board that the relay is on is part of a stack boards that costs 2K. So, it sounds like my options are to check to see if the 12v relay functions and then use that to drive a relay, or use the FNDC relay, or spend 2k for the board stack. Michael On Sep 14, 2021, at 11:10 AM, Jay <[email protected]<mailto:[email protected]>> wrote: There are two relays on that board, one dry one 12v. Aux output And Aux relay Do both not work? Jay On Sep 14, 2021, at 11:55 AM, Michael Morningstar <[email protected]<mailto:[email protected]>> wrote: Wrenches, I’ve got a Radian 8048/Mate 3S that no longer is activating the relay responsible for generator starting. I’ve power cycled everything and updated firmware. When I attempt to start the generator via the Mate 3S, the relay does not close. Any suggestions before I look into replacing the relay/board? Which board do I order and what is the best source? Many thanks, Michael Michael Morningstar Morningstar Electric PO Box 1494 Mount Shasta, California 96067 530-921-0560 CSLB 949635 <SmallGif.gif> _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org<https://protect2.fireeye.com/v1/url?k=0af5543c-556e6d31-0af65db7-86801c117383-2068e3ce0306da80&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Fre-wrenches.org%2F> List Address: [email protected]<mailto:[email protected]> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<https://protect2.fireeye.com/v1/url?k=305f1297-6fc42b9a-305c1b1c-86801c117383-aee1b7175658cf7c&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org> There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/<https://protect2.fireeye.com/v1/url?k=aa77777a-f5ec4e77-aa747ef1-86801c117383-937c13663bf8a2e7&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=https%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2F> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<https://protect2.fireeye.com/v1/url?k=4d366495-12ad5d98-4d356d1e-86801c117383-ca3e60572a31da0b&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Flists.re-wrenches.org%2Fpipermail%2Fre-wrenches-re-wrenches.org> List rules & etiquette: http://www.re-wrenches.org/etiquette.htm<https://protect2.fireeye.com/v1/url?k=e7eef7bc-b875ceb1-e7edfe37-86801c117383-3571d1803b400dba&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm> Check out or update participant bios: http://www.members.re-wrenches.org<https://protect2.fireeye.com/v1/url?k=bbd2adb1-e44994bc-bbd1a43a-86801c117383-03744d0e1a99e3bd&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Fwww.members.re-wrenches.org%2F> _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org<https://protect2.fireeye.com/v1/url?k=c4264316-9bbd7a1b-c4254a9d-86801c117383-57506c0ec558d3df&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Fre-wrenches.org%2F> List Address: [email protected]<mailto:[email protected]> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<https://protect2.fireeye.com/v1/url?k=f791d831-a80ae13c-f792d1ba-86801c117383-c3aa960e59243037&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org> There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/<https://protect2.fireeye.com/v1/url?k=dbf3ad5f-84689452-dbf0a4d4-86801c117383-45ae40ba07c514c3&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=https%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2F> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<https://protect2.fireeye.com/v1/url?k=a7fb0531-f8603c3c-a7f80cba-86801c117383-44cbb001e19b5483&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Flists.re-wrenches.org%2Fpipermail%2Fre-wrenches-re-wrenches.org> List rules & etiquette: http://www.re-wrenches.org/etiquette.htm<https://protect2.fireeye.com/v1/url?k=d0be0167-8f25386a-d0bd08ec-86801c117383-b72f1170537d980b&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm> Check out or update participant bios: http://www.members.re-wrenches.org<https://protect2.fireeye.com/v1/url?k=7fbb61d1-202058dc-7fb8685a-86801c117383-4ad5b4bb18a80349&q=1&e=425ad77c-150b-4ea7-b35a-9bb64a3adfc7&u=http%3A%2F%2Fwww.members.re-wrenches.org%2F> Michael Morningstar Morningstar Electric PO Box 1494 Mount Shasta, California 96067 530-921-0560 CSLB 949635 [cid:[email protected]] This email and any attachments may contain confidential information that is intended only for the recipient(s). If you have received this email in error, please notify the sender and delete it from your system. Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company or its affiliates. This email does not constitute an agreement to conduct transactions by electronic means and does not create any legally binding contract or enforceable obligation in the absence of a fully signed written contract. The recipient should check this email and any attachments for viruses. The company accepts no liability for any loss or damage caused by software viruses. If you are the intended recipient and you do not wish to receive similar email(s) from us in the future then please notify the sender. Please consider the environment before printing.
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
