John: I have operated FX inverters of different firmware in one system (not FXRs). I was told the newest firmware should be in a lower port but the system worked more reliably with the newer firmware unit in the higher port. May be worth experimenting. Good luck.
William Miller On Sun, Mar 20, 2022 at 7:14 AM John Blittersdorf < [email protected]> wrote: > Wrenches, I just added a 2nd VFX3648 stacked as SLAVE L1 to increase > charging of his new eVault 18.5 from 12kw Kohler gen. It connects to the > generator but doesn’t charge. I read in the manual that both inverters > must be the same firmware revision. Once hooked up I found that the added > inverter was rev #68 and the original one rev 61. Would it be possible to > switch which inverter is the master and have the newer one recognize the > older one.? Otherwise is my only option to put a new control board in the > original inverter? And possibly also in the new one. Anyone know what the > latest rev or last one was? > > John Blittersdorf > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- William Miller Miller Solar.com 895-438-5600 www.millersolar.com
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
