Hello Wrenches, Is anyone aware of a remote load shedding solution that doesn't require additional signal wiring to the loads?
Generac has a great solution for this that they adapted from their generator business called a Generac Smart management module. Its a 2P x 50A relay that monitors line frequency going to the load and it will trip it off line when the frequency sags. The inverter does a small wiggle that will trip it offline based on some Dip switch settings. on the unit. This really simplifies code compliance in some cases. I'm wondering if there are any other more general solutions out there for this. Thanks in advance! -- Mac Lewis *"Yo solo sé que no sé nada." -Sócrates*
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
