Hi Mac,
Below is what I use from Schneider for 200A grid-tie. They finally made
it easy, not inexpensive though. Offgrid version firmware out in the
fall.
https://solar.se.com/us/en/product/backup-control-switch/
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail [email protected]
text 209 813 0060
On 2023-06-26 10:05 pm, Mac Lewis via RE-wrenches wrote:
Hello Wrenches,
Is anyone aware of a remote load shedding solution that doesn't require
additional signal wiring to the loads?
Generac has a great solution for this that they adapted from their
generator business called a Generac Smart management module. Its a 2P
x 50A relay that monitors line frequency going to the load and it will
trip it off line when the frequency sags. The inverter does a small
wiggle that will trip it offline based on some Dip switch settings. on
the unit. This really simplifies code compliance in some cases.
I'm wondering if there are any other more general solutions out there
for this.
Thanks in advance!
--
Mac Lewis
"Yo solo sé que no sé nada." -Sócrates
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try
the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
