He is using a Lithtronics battery in an open loop. They have a 5 year warranty so I do not think it has a top grade cell in that battery, that is probably the reason for the very high charging voltage specified by the battery company (not the cell mfg). If the battery only has a 5 year warranty you get what you get. LFP is extremely mature technology and they know how long cells will last under normal operating conditions. That warranty will tell you the installer, what you are working with in regards to the cells inside of the pack.
MNP has the charging range for the batteries right on the side of the battery, it is a wide range and will work with most settings. The operating range for the PF16 is 46.4 to 57.6 Volts. If you reach out to the MNP support they can give you the LA / OL battery charging logic. It works and I have tested it. The LA / OL support was fully released in V7 firmware.
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
